Why do people sound robotic on a teleprompter?
Most people sound robotic because they read at the machine's speed instead of their own, and because they read every word with the same weight. A speaker in conversation speeds up through familiar parts, slows down for the point, and pauses before anything important; a fixed-speed scroll removes all three.
The range is wide. A review of reading and speech research puts estimates of normal speaking rate between 120 and 200 words per minute, and a 2020 study of reading comprehension cites a "normal" speaking rate of about 180 words per minute while noting that many speakers go past 200 in conversation. One fixed number cannot match a person who moves around inside that range from sentence to sentence. That is why a teleprompter set to the right average speed can still feel wrong for most of the script.
The second cause is the eyes. When the reader chases a line that is already moving, the gaze locks onto the words and the face goes still. Viewers read that stillness as reading, even when the voice is fine.
How fast should you read from a teleprompter?
Read at the pace you would use to explain the same idea to one person across a table, and let the teleprompter follow you, not the other way round. For most people that is somewhere between 130 and 170 words per minute on camera, slower for dense or technical material. The background is in the best words per minute for video.
| Content | Starting pace | Why |
|---|---|---|
| Technical tutorial | 120–140 wpm | Viewers need time to follow steps |
| Talking-head explainer | 140–160 wpm | Close to relaxed conversation |
| Short social video | 160–180 wpm | Energy matters, sentences are short |
| Formal speech | 110–140 wpm | Room for pauses and emphasis |
On a fixed-speed prompter, find your pace by reading a 150-word paragraph aloud and timing it, then set the scroll from that. On a voice-following teleprompter there is nothing to set: the text moves when you speak and stops when you pause, so the pace can change from one sentence to the next.
What should the script look like on screen?
Short lines, short paragraphs and big text. The fewer words per line, the less your eyes travel sideways, and the less a viewer notices that you are reading.
- Line length: aim for 5 to 8 words per line. Widen the side margins rather than shrinking the text.
- Text size: large enough to read without leaning in from where you sit or stand. On a phone at arm's length that is usually 30 points or more.
- Reading line: place it about a third of the way down the screen, close to the camera, so the words you are saying sit nearest the lens.
- Stage directions: write them in square brackets, such as [pause] or [smile], so they stand apart from the words you say.
- Read words: let them fade or scroll away, so a glance after a pause lands on the next unread line.
- Breaks: start a new paragraph wherever you would take a breath.
Writing for the ear matters as much as layout; our guide on writing a script for a teleprompter covers sentence length, numbers and names.
How do you keep eye contact while reading?
Keep the line you are reading as close to the lens as possible, and stand or sit far enough away that the gap between words and lens becomes a small angle. Eye contact on camera is a question of angle, not of looking straight into the lens at all times.
A 2025 study in the Journal of Vision found that viewers perceived eye contact best when the speaker looked about 2 degrees below the camera lens, not directly into it. A reading line just under the lens is therefore close to ideal. More distance helps too: at arm's length, a few centimetres between the lens and the text is a smaller angle than the same gap seen from close up. There is more detail in our guide to keeping eye contact on video.
How do you practise reading a teleprompter?
Do two short test takes before the real one: one to find the pace and text size, one to check the recording. Watch the second with the sound off; if your eyes look like they are tracking lines, shorten the lines or move back from the screen.
Read the script aloud once away from the prompter first, marking the words you want to stress in your head. Then read it on the prompter as if telling a friend. When you lose your place, stop, look at the lens, and pick up from the start of the sentence; editors cut on those pauses easily. With VideoPrompter, the text waits during that pause and finds the sentence again when you repeat it, so a fluff costs a few seconds instead of a full restart.
A teleprompter that follows your voice
VideoPrompter scrolls as you speak, stops when you stop and waits through [asides]. iPhone, iPad and Mac; the first 3 sessions are free.
Get VideoPrompter