Blog

How to Use a Beam-Splitter Teleprompter Rig

Set up a beam-splitter teleprompter with an iPad or iPhone: mirror the text, set distance and text size, and avoid the reflections that give the rig away.

What does a beam-splitter teleprompter do?

It lets you read directly in front of the lens. A sheet of partly reflective glass sits at about 45 degrees in front of the camera; it reflects a screen lying below it toward you, while the camera films through the glass. Your eyes look at the text and into the lens at the same time.

That matters because viewers notice small gaze offsets. In one study, observers judged eye contact better at a 7-degree gaze angle than at 15 degrees in 87% of comparisons. A beam splitter brings the angle close to zero, which no screen beside the camera can.

The same principle works at any scale. Broadcast studios use large prompting monitors under the glass; creators use a tablet or a phone in a compact rig on a tripod. The glass, the hood that blocks stray light, and the mirrored text are the same in both, and so are the setup steps below. What changes is how far you can stand from the camera, which sets how large the text must be. There is a fuller walkthrough in how teleprompters scroll.

How do you set it up with an iPad or iPhone?

Lay the device in the rig's tray, screen up, turn on mirror mode in the teleprompter app, and line the camera up behind the glass. The rest is distance and text size.

  1. Mount the camera behind the glass, lens centred, with the hood closed so no light enters from the sides.
  2. Place the iPad or iPhone in the tray under the glass, top edge toward the camera unless the rig says otherwise.
  3. Turn on Mirror (left to right) in the app. If the text reads upside down in the glass, also turn on Flip.
  4. Set the brightness high; the glass passes most light through, so the reflection is dimmer than the screen.
  5. Size the text from where you stand and read a line aloud to check.

Apps differ here. VideoPrompter has both Mirror left to right and Flip upside down, and on an iPad starts at a larger text size than on a phone.

How big should the text be, and how far should you stand?

Stand far enough that the camera frames you as intended, then raise the text size until you can read it without effort; every extra metre needs noticeably larger text. Test at the real distance, never at arm's length.

Typical starting points for a tablet in a beam-splitter rig. Adjust to your eyesight and framing.
Distance to the glassText size to tryWords per line
About 1 m40–56 pt5–7
About 2 m64–80 pt4–6
About 3 m90–110 pt3–5

Distance also helps the eye line. The further you stand, the smaller the angle your eyes travel across the lines, so the reading movement disappears.

Where should your eyes rest?

On the reading line, which should sit at or just below the centre of the lens. Research on screen-mediated eye contact found the strongest impression when people looked about 2 degrees below the lens, so a reading line slightly under centre is ideal.

Most teleprompter apps let you move the reading line. Put it where your eyes fall naturally when you look at the lens, then let the text come to it. If the scroll follows your voice, your eyes can stay there instead of tracking a moving line; our page on how voice follow works explains how that is done, and eye contact on video covers the theory.

What gives a teleprompter rig away on camera?

Reflections, a visible hood edge, and eyes that sweep sideways. All three are fixable before you press record.

  • Reflections: light from behind the camera reflects in the glass. Close the hood and keep lamps in front of you.
  • Double image: some glass shows a faint second reflection. Turn the screen brightness down a little, or use glass made for prompting.
  • Sideways sweep: shorten the lines by widening the margins.
  • Dead stare: blink, move your head, and pause at the ends of thoughts, as in reading naturally.

A teleprompter that follows your voice

VideoPrompter scrolls as you speak, stops when you stop and waits through [asides]. iPhone, iPad and Mac; the first 3 sessions are free.

Get VideoPrompter

Questions about this article

Why does teleprompter text need to be mirrored?

The glass reflects the screen, which reverses it left to right. Mirroring the text in the app makes the reflection read correctly.

Does the camera see the text on the glass?

No. The camera films through the glass from behind; the reflected text faces the speaker.

Can I use an iPhone in a beam-splitter rig?

Yes, if the rig's tray fits it. The text has to be large, so a phone works best at short distances; a tablet is easier from two metres or more.

Do I need a remote with a beam-splitter teleprompter?

Not with a voice-following app, which moves the text as you speak. With fixed-speed scrolling, a remote or foot pedal helps you adjust.